Steel is the standard way to build warehouses and sheds in Sharjah. It spans wide openings without internal columns, goes up quickly, and is easy to extend later. Whether you need a new warehouse in Al Sajaa, an extension in the Sharjah Industrial Areas, or a shed in a free zone, this guide covers the choices that decide cost, programme, and how well the building works.
Choosing the frame
Portal frames
Most warehouses use steel portal frames: columns and rafters joined with rigid connections. They give clear spans for racking and forklifts and are economical for single-storey buildings.
Hot-rolled or built-up sections
Frames can use standard hot-rolled sections or welded plate members sized exactly to the loads. Hot-rolled sections are quick to source and fabricate; built-up members can save weight on long spans. See our hot-rolled steel warehouse in Al Quoz.
Clear height and spans
Decide clear height from your racking and any future mezzanine. A little extra height at the start is far cheaper than raising a roof later.
Roof and walls
- Insulated sandwich panels keep the building cooler, which matters for food, pharma, and offices
- Single-skin sheeting is cheaper for open storage and workshops
- Ridge ventilators and skylights improve air flow and daylight
- Block walls to a height with sheeting above resist damage from forklifts
Extending an existing warehouse
Many Sharjah projects extend an existing building rather than starting fresh. The new frame must suit the old one, so a survey comes first: frame sizes, connections, foundations, and the condition of the steel. Extensions can be a new bay, a lean-to on one side, or a mezzanine inside. See mezzanine floors.
Protecting steel in Sharjah’s climate
Heat, humidity, and, near the coast at Hamriyah, salt air all attack steel. Specify a coating system suited to the exposure, and consider hot-dip galvanizing for external members.
Planning the project
- Confirm the plot, authority, and any landlord requirements (see Sharjah approvals)
- Agree size, clear height, loads, doors, and future expansion
- Design, drawings, and submission
- Foundations by the civil contractor while steel is fabricated
- Steel erection, then roof and wall cladding
Recent warehouse work
- Warehouse for Majama Food Trading, Al Sajaa
- Warehouse for ABZ Real Estate, Al Khawaneej, Dubai
- Warehouse refurbishment, Dubai Investments Park
- Industrial warehouse at Dry Dock, Dubai
Why DPSC for Sharjah warehouses
Our Sharjah branch in Al Batayeh is a large scale facility built for high capacity steel fabrication. Cutting, welding, and finishing are carried out in-house under strict QA/QC inspection, and our own crews erect the steel. Read the full warehouse construction guide or see warehouse construction services.
Frequently asked questions
How long does a steel warehouse take to build?
It depends on size and approvals. Steel is fabricated off site while foundations are built, so erection on site is usually quick.
Can you extend my existing warehouse?
Yes. We survey the existing frame first and design the extension to suit it.
Do you work in Al Sajaa and the free zones?
Yes, across Sharjah, including Al Sajaa, the Sharjah Industrial Areas, Hamriyah Free Zone, and SAIF Zone.
Get a quote for your warehouse or WhatsApp us your plot details.
Need steel fabricated in Dubai? DPSC designs, fabricates in-house, and erects structural steel. Send your drawings for a quote or call +971 56 889 7671.

