Adding a mezzanine, extending a warehouse, or building a new steel structure in Sharjah usually needs approval before work starts. The rules depend on where your plot is and what you are building. This guide explains how the process normally works, who is involved, and what a steel contractor should give your consultant. It is general guidance: your consultant will confirm the exact requirements for your plot.
Who approves what in Sharjah
Sharjah Municipality
For most plots in the emirate, building permits are handled by Sharjah Municipality. New buildings, extensions, mezzanines that add floor area, and structural alterations normally need a permit, submitted by a registered engineering consultant on your behalf.
Free zone authorities
Plots inside free zones such as Hamriyah Free Zone and SAIF Zone generally follow the free zone authority’s own building and engineering approvals. If your premises are in a free zone, start with the free zone’s engineering department.
Civil Defence
Fire and life safety are reviewed by Civil Defence. Adding a mezzanine or extending a building can change escape routes, travel distances, sprinkler coverage, and fire rating requirements, so Civil Defence input matters as much as the structure.
Landlord and building owner
If you rent, the landlord’s written consent is usually needed before any structural work, and many landlords ask to review drawings too.
Works that usually need approval
- New steel warehouses, sheds, and buildings
- Warehouse extensions and lean-to structures
- Mezzanine floors that add usable floor area
- Changes to an existing structural frame, such as removing or strengthening members
- Large canopies and roof structures
Small items like internal stairs to existing platforms, handrails, and racks may need less, but always check with your consultant before starting.
What your steel contractor provides
- Measured survey of the existing building and floor slab
- Structural design and calculations for the steel, coordinated with your consultant
- Shop drawings showing every member, connection, and base plate
- Material certificates for steel and bolts
- Coating specification, such as painting or hot-dip galvanizing
- Method statement and risk assessment for erection
At DPSC, fabrication is in-house: cutting, welding, and finishing are carried out under strict QA/QC inspection, and inspection records support handover.
A typical sequence
- Site visit and survey
- Concept and loads agreed with you and your consultant
- Design, calculations, and drawings
- Submission by the consultant and authority comments
- Fabrication starts once drawings are approved
- Erection on site, inspections, and completion
Fabrication can be planned while approvals are in progress, so steel is ready to erect soon after the permit is issued.
Working in Dubai too?
Dubai has its own authorities, including Dubai Municipality and Trakhees. Read authority approvals for steel structures in Dubai.
Frequently asked questions
Do I need approval for a mezzanine in Sharjah?
In most cases, yes, because a mezzanine adds floor area and affects fire safety. Your consultant will confirm.
Can DPSC submit the permit?
Permits are submitted by a registered consultant. We work with your consultant, or can introduce one, and provide the steel drawings and calculations they need.
How long does approval take?
It depends on the authority, the project, and how complete the submission is. Starting with accurate drawings is the best way to avoid delays.
Planning a project? See our Sharjah services or ask for a quote.
Need steel fabricated in Dubai? DPSC designs, fabricates in-house, and erects structural steel. Send your drawings for a quote or call +971 56 889 7671.


